Table of Contents
Are you planning a road trip and looking for a way to save money on your rental car? And wants to know how to hotwire a car? Hotwiring a car may be an option for you. Hotwiring is the process of starting a car without using the key. This can be done by bypassing the ignition switch or by manipulating the wiring in the car.
While hotwiring is a relatively easy process, it can be dangerous if done incorrectly. It’s important to be familiar with the make and model of your vehicle before attempting to hotwire it. There are many online tutorials that can walk you through the process step-by-step.
If you’re comfortable with hotwiring, it can be a great way to save money on your rental car expenses. Just be sure to take precautions and use common sense when performing this procedure.
What Does It Mean To “Hotwire” A Car?
When you “hotwire” a car, you’re bypassing the ignition system and starting the engine by directly connecting the battery to the spark plugs. This is usually done by using a metal object to touch both terminals of the battery at the same time.
Hotwiring a car is illegal in many states, and it’s also very dangerous. Not only can you start the car this way, but you can also send a powerful electrical current through your body if you’re not careful.
There are a few reasons why people might want to hotwire a car. Maybe they’ve lost their keys or they don’t have time to find them. Maybe they’re trying to steal the car. Or maybe they just don’t know how to use the regular ignition system.
How To Open A Car Door Without Using A Key
There are a few methods you can use to open a car door without using a key. One is to use a hanger. Open the hanger so the hook is on one side and the metal part is on the other.
Slip the hanger through the car window, grab the door handle, and pull up. If your car has power locks, you can also use a keyless entry remote to unlock the door.
Press the button on the remote and hold it until the door unlocks. If you have a key, you can also use it to unlock the door. Put the key in the lock and turn it left or right until it clicks.
How to Hotwire a Car?
There are many reasons why someone might want to hotwire a car. Maybe you’re borrowing a car and the owner has left the keys inside. Or maybe you’ve been stranded somewhere and need to get home. Whatever the cause, here’s how to do it:
- Find the ignition switch. In most cars, it’s in the center of the dashboard.
- Look for two small metal plates on either side of the switch. These are called “tumblers.”
- Using a paperclip or other small object, poke one of the tumblers until it pops up.
- Do the same thing on the other side of the switch.
- Turn the key to start the car!
Drilling of lock pins
In order to hotwire a car, the first step is to drill out the lock pins. This can be done with a standard drill or a Dremel tool. Once the lock pins are drilled out, the door can be opened and the wires can be accessed. The black wire is usually the positive wire and the red wire is usually the negative wire.
The black wire can be connected to the positive terminal on the battery, and the red wire can be connected to the negative terminal on the battery. Once these connections are made, the car can be started by turning on the ignition switch.
Tips to Hotwire a Car
There are a few things you can do to make the process of hotwiring a car easier. Firstly, make sure you know where the wires are located. Secondly, use a thin object like a pen or paper clip to short the two wires together. Finally, make sure the car is in the park and the key is turned off before you start it up.
If you’re not comfortable hotwiring a car, there are other ways to start it without using the key. One option is to use a metal coat hanger to jimmy the lock open. Another option is to use a screwdriver to pop the ignition switch.
If you’re stuck on the side of the road and your car won’t start, don’t panic! There are plenty of ways to get your car going again without having to call a tow truck.